« previous next »
Pages: 1 ... 6 7 [8] 9 10 ... 21   Go Down

Author Topic: Post your rig's  (Read 70947 times)

KU@TO

  • NoBS|Member
  • Colonel
  • Offline
  • *
  • 574
  • Karma:
    +1/-2
Re: Post your rig's
« Reply #105 on: February 17, 2008, 01:49:02 PM »
Quote from: werth on February 15, 2008, 02:41:47 PM
Quote from: smitty1258 on February 15, 2008, 02:31:06 PM
stable?
and temps

you mean stable enough to pass the 3 min Orthos? ;)  seriously, i ran orthos for 5 mins stable but temps do get close to 70c so I didn't bother to run it for longer than that.  Outside of the torture test it idles around 34c and on load around 66C.  Guess it's time to switch to water soon.  Did you settle on 4.6?

Quote from: gren on February 17, 2008, 12:43:15 PM
Very nice cable management bro,Does the newer 900 come with holes in the back? I had to cut mine with rotary myself,I've read the whole thread about Antec 900 at xtremesystems but i'm way too lazy to do the HD mod like you did, :) Nice OC chip you got there as well,only 1.45v to get 4.5GHz,my e6600 needs 1.535v to get stable @3.6.

Good job mang!  I had to cut a few holes under the mobo and on the side of the HD trays.  I also used the xtremesystems thread as a guide, but I did the HD mod a little differently. 

Quote from: gren on February 17, 2008, 12:43:15 PM
Nice OC chip you got there as well,only 1.45v to get 4.5GHz,my e6600 needs 1.535v to get stable @3.6.

The 45nm chips use less voltage.. i needed 1.5v to run my e6850 @4GHz
What kind of temps do you get running @ 1.535v? 
Logged

gren

  • Lieutenant
  • Offline
  • *
  • 221
  • Karma:
    +0/-0
Re: Post your rig's
« Reply #106 on: February 17, 2008, 02:28:57 PM »
Quote from: KU@TO on February 17, 2008, 01:49:02 PM
The 45nm chips use less voltage.. i needed 1.5v to run my e6850 @4GHz
What kind of temps do you get running @ 1.535v? 

It idles at low 30s Celsius and mid 60s when Orthos small ffts,I do have C1E enabled.all fans are on low.
Try point your Ultra 120 up towards the 200mm top fan if it will fit on your mobo,I think this might help the air flow and lower your temp a bit more,by the way your cuts on the case is like factory made, super job on your 900! :)
Logged

#Madmik3

  • General
  • Offline
  • *
  • UseLess Poster/ Fail
  • 1566
  • Karma:
    +0/-0
Re: Post your rig's
« Reply #107 on: February 27, 2008, 09:27:19 AM »
Wow im getting nvidia 7900gs 512mb. Its good enough.
Logged

devvil

  • Lieutenant
  • Offline
  • *
  • 166
  • Karma:
    +0/-0
Re: Post your rig's
« Reply #108 on: February 27, 2008, 12:30:59 PM »
Quote
CPU Type                                          DualCore Intel Core 2 Duo E6750, 2666 MHz (8 x 333)
      Motherboard Name                                  Asus P5KC  (3 PCI, 1 PCI-E x1, 2 PCI-E x16, 4 DDR2 DIMM, 2 DDR3 DIMM, Audio, Gigabit LAN, IEEE-1394)
      Motherboard Chipset                               Intel Bearlake P35
      System Memory                                     2048 MB  (DDR2-800 DDR2 SDRAM)
      DIMM1: Team Group Team-Elite-800                  1 GB DDR2-800 DDR2 SDRAM  (5-5-5-16 @ 400 MHz)  (4-4-4-11 @ 266 MHz)  (3-3-3-8 @ 200 MHz)
      DIMM3: Team Group Team-Elite-800                  1 GB DDR2-800 DDR2 SDRAM  (5-5-5-16 @ 400 MHz)  (4-4-4-11 @ 266 MHz)  (3-3-3-8 @ 200 MHz)
      BIOS Type                                         AMI (10/30/07)
Display:
      Video Adapter                                     NVIDIA GeForce 8800 GT  (512 MB)
      3D Accelerator                                    nVIDIA GeForce 8800 GT
      Monitor                                           Philips 190S (190S6)  [19" LCD]  (BZ  310396)

    Multimedia:
      Audio Adapter                                     Creative SB X-Fi XtremeGamer Sound Card
Disk Drive                                        SAMSUNG SP1603C  (160 GB, 7200 RPM, SATA-II)

Done by Everest Ultimate

PSU : Nox Urano Series 500w

Thanks to all of you who helped me decide on the parts for this, I
Logged

96Firebird

  • Private
  • Offline
  • *
  • 6
  • Karma:
    +0/-0
Re: Post your rig's
« Reply #109 on: February 27, 2008, 09:15:26 PM »
Intel E8400 3.00GHz
Gigabyte GA-P35-DS3L
2x1024MB Mushkin DDR2-800 RAM: 4-5-4-11 @2.1V
eVGA GeForce 8800GT (700/1900)
Seagate 250GB, 7200 RPM, 8MB cache SATA HDD (+250GB external HDD for files)
Enermax FMA-II 460W PSU
Coolermaster 534 Case
22" Acer 2216Wb Widescreen monitor



3DMark06 Score
12,077 3DMarks
5759 SM2.0 Score
5450 HDR/SM3 Score
2711 CPU Score
Logged


Don't Ever Judge Me

DriveRaider

  • Colonel
  • Offline
  • *
  • 663
  • Karma:
    +0/-0
Re: Post your rig's
« Reply #110 on: March 09, 2008, 11:42:02 PM »
this is a pic of my rig w.o anything in it yet. i read the reviews for the XFX 680i SLI LT mobo and it was a piece of shit. my parts will be here wednesday and im going to return the xfx mobo and buy the asus p5ne mobo

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=2853608&sku=A455-2322 .

the parts include 2 gigs of DDR2 800mhz ram, ultra aluminus case, OCZ 500 watt PSU, 250 gb PATA HDD, Intel pentium dual core ( i thought it was a core 2 duo but i was wrong), and the 8600 GT xxx (pre-overclocked). i think i know how to put this bad boy together.



Logged

smitty1258

  • NoBS|Administrator
  • General
  • Offline
  • *
  • "See, the problem is that God gives men a brain and a penis, and only enough blood to run one at a time."
  • 6071
  • Karma:
    +0/-0
  • Personal Text
    pwning sounds!
    • No Bullshit!
Re: Post your rig's
« Reply #111 on: March 10, 2008, 09:26:43 PM »
cool, lets see it all thrown together now.
Logged
A story. A man fires a rifle for many years. and he goes to war. And afterwards he comes home, and he sees that whatever else he may do with his life - build a house, love a woman, change his son's diaper - he will always remain a jarhead. And all the jarheads killing and dying, they will always be me. We are still in the desert.

Quote from: Baim
not even pentium 1 billion will improve YOUR skills :)
Quote from: Evilgenius
* Evilgenius pulls out his cock to compare

DriveRaider

  • Colonel
  • Offline
  • *
  • 663
  • Karma:
    +0/-0
Re: Post your rig's
« Reply #112 on: March 13, 2008, 05:49:21 PM »
heres the beast






Logged

smitty1258

  • NoBS|Administrator
  • General
  • Offline
  • *
  • "See, the problem is that God gives men a brain and a penis, and only enough blood to run one at a time."
  • 6071
  • Karma:
    +0/-0
  • Personal Text
    pwning sounds!
    • No Bullshit!
Re: Post your rig's
« Reply #113 on: March 13, 2008, 11:28:08 PM »
2 things, get an after market cooler, and clean up them wires.
Logged
A story. A man fires a rifle for many years. and he goes to war. And afterwards he comes home, and he sees that whatever else he may do with his life - build a house, love a woman, change his son's diaper - he will always remain a jarhead. And all the jarheads killing and dying, they will always be me. We are still in the desert.

Quote from: Baim
not even pentium 1 billion will improve YOUR skills :)
Quote from: Evilgenius
* Evilgenius pulls out his cock to compare

DriveRaider

  • Colonel
  • Offline
  • *
  • 663
  • Karma:
    +0/-0
Re: Post your rig's
« Reply #114 on: March 14, 2008, 05:40:33 AM »
hey, its my first build =p what did you expect?
Logged

Yrch

  • NoBS|Member
  • Corporal
  • Offline
  • *
  • 45
  • Karma:
    +0/-0
Re: Post your rig's
« Reply #115 on: March 21, 2008, 02:02:29 AM »
I managed to fall upon 2 8800 GTS's
Yippie right? Not really I have an old school DFI board where the Northbridge gets in the way of slot one. solution

http://www.newegg.com/Product/ShowImage.aspx?Image=35-109-131-02.jpg%2c35-109-131-03.jpg%2c35-109-131-04.jpg%2c35-109-131-05.jpg%2c35-109-131-06.jpg&S7ImageFlag=0&WaterMark=1&Item=N82E16835109131&Depa=1&Description=Thermalright+HR-05-SLI+Heatsinks+only

But I cant find it anywhere. Anyone know where I can get an offset NB cooler for a 939 DFI Lan party MB?
Remeber the 8800's are double wide so it needs to offset quite a bit. I have the 2 holes on eather side of the chip so thats the attachment method
~Yrch
Logged

smitty1258

  • NoBS|Administrator
  • General
  • Offline
  • *
  • "See, the problem is that God gives men a brain and a penis, and only enough blood to run one at a time."
  • 6071
  • Karma:
    +0/-0
  • Personal Text
    pwning sounds!
    • No Bullshit!
Re: Post your rig's
« Reply #116 on: March 21, 2008, 10:45:18 AM »
I found your solution, drop the 939 :)
Logged
A story. A man fires a rifle for many years. and he goes to war. And afterwards he comes home, and he sees that whatever else he may do with his life - build a house, love a woman, change his son's diaper - he will always remain a jarhead. And all the jarheads killing and dying, they will always be me. We are still in the desert.

Quote from: Baim
not even pentium 1 billion will improve YOUR skills :)
Quote from: Evilgenius
* Evilgenius pulls out his cock to compare

werth

  • NoBS|Member
  • General
  • Offline
  • *
  • 6172
  • Karma:
    +3/-5
  • Personal Text
    fuck WoW!
Re: Post your rig's
« Reply #117 on: March 21, 2008, 12:17:18 PM »
Logged


Evilgenius

  • Guest
Re: Post your rig's
« Reply #118 on: March 21, 2008, 09:40:09 PM »








    Motherboard:
      CPU Type                                          Intel Pentium 4 551, 3400 MHz (17 x 200)
      Motherboard Name                                  Intel Sorento D945GNT  (4 PCI, 2 PCI-E x1, 1 PCI-E x16, 4 DDR2 DIMM, Audio, Video, LAN)
      Motherboard Chipset                               Intel Lakeport-G i945G
      System Memory                                     1024 MB  (DDR2-667 DDR2 SDRAM)

    Display:
      Video Adapter                                     NVIDIA GeForce 7600 GTOC  (256 MB)
      3D Accelerator                                    nVIDIA GeForce 7600 GTOC
      Monitor                                           Gateway EV700  [17" CRT]  (84652380)

    Storage:
      Disk Drive                                        ST3250410AS  (250 GB, 7200 RPM, SATA-II)
      Disk Drive                                        WD 3200AAJB Externa USB Device  (298 GB, USB)
      Optical Drive                                     LITE-ON DVDRW LH-20A1P  (DVD+R9:8x, DVD-R9:8x, DVD+RW:20x/8x, DVD-RW:20x/6x, DVD-RAM:12x, DVD-ROM:16x, CD:48x/32x/48x DVD+RW/DVD-RW/DVD-RAM)

    Network:
      Network Adapter                                   Intel(R) PRO/100 VE Network Connection
      Network Adapter                                   Linksys Wireless-N PCI Adapter WMP300N
 
    Peripherals:
      Printer                                           HP Officejet 7300 series
      USB Device                Microsoft LifeCam VX-6000 <--FREE FROM MS LIVE CLUB :p HACKED LOL
      USB Device                Microsoft LifeChat LX-3000 <<--- ALSO FREE FROM MS LIVE CLUB :p

sorry for the shitty pics lol  this system was all free so i cant complain :)
Logged

Yrch

  • NoBS|Member
  • Corporal
  • Offline
  • *
  • 45
  • Karma:
    +0/-0
Re: Post your rig's
« Reply #119 on: April 02, 2008, 03:02:28 AM »
Ok we have total 100% complete success with the new instalation, well not really. Every once in a while I get a BSOD about my video driver, danm fucking drivers can kiss my ass. They never work as intended.

I mananaged to find an offset thermalright off set NB cooler, it can take a 70mm fan but im running passive and its around 55-60 so thats all set.

http://www.thermalright.com/new_a_page/product_page/chipset/hr05_sli/product_chitset_cooler_hr05_sli.html?art=MTQyMywxLCxoZW50aHVzaWFzdA==

Also got both the 8800GTS' running in a stable SLI, CPU OC'ed from 2.2==>2.5    For somereason 2.6 wasnt 100% stable and I dont have the cooling to currently give it any more volts than I already am.
Memory is OC'ed (of course) to DDR 474.

Passed running superPI+Prime95+ATI Tool artifact scanner. Yes at the same time.

Got a little toasty in here tho, had to open the window. the back of my case is a freaking space heater.

I guess I could get my ass in gear and give you guys pictures of it but im lazy nor do I really know how to do that sort of stuff..... Oh pulled a 44k+ in 3dMARK03. I dont know about any of the other ones never ran them.

I suggest buying a PC Power and Cooling powersupply if you wanted to run something like this, It pulls insaine amps. I personally went with the model that gives 49A down a single 12v rail. cost 200 bucks but hey 'got juice?'

Til we meet again and im not so sick or stoned. ~Yrch
Logged
Pages: 1 ... 6 7 [8] 9 10 ... 21   Go Up
« previous next »