[smitty1258]

For my Ku@to.

Ill go ahead and move that into spot #1 

 

Nice score!  I definitely can't beat that with my 8800 GT.   What happened to your CPU score? 

Well I was holding back, thinking you were ganna pull some shit outta your sleves, wanted to make sure I had some room to play with.

Guess Ill go no holds bar now.....

P.S. Ill need an orthos screen to submit that cpu OC.


@ super J , use 3dmark 06

[Super J]

here is my stuff in 06 very different scores.  i dont know what is holding me back

[werth]

that would be your pentium D holding you back

[KU@TO]

What-what! I think she still has a little more left in her...

[Super J]

i thought it was.  but it is still a dual core and a 65 nm chip and i am running like a 1140 fsb.  board may also be holding me back.  any one have some stuff for sale.  good sli board and a c2d

[smitty1258]

here is my stuff in 06 very different scores.  i dont know what is holding me back

#1 the cpu

#2 THe G-80 core on your 8800 GTS

Compare your 3dmark 8800GTS (G-80) Score to my 8800GTS (G-92) Score, youll see the HUGE diff that the core makes.

@ Ku@to- Lets see whats hiding behind the score screen

That will put you in 1st for a few hours

[KU@TO]

@ Ku@to- Lets see whats hiding behind the score screen

You know, I was asking myself that same question when I saw your pic!  So I thought I'd keep you guessing too.  Not hard to figure out though.. the CPU score is lower than the one I posted at 4.6.  Still same ol' 8800GT.

That will put you in 1st for a few hours

Maybe I'll just get a quad and score 17k ....I'm sure you'll beat it.  I had to give it hell to get that score lol. 

[smitty1258]

whats the 24/7 report on the 8500?

[KU@TO]

The chip does 3.9 stable @ stock volts, so that's what I have it running at 24/7.  Orthos stable at 4.5, same settings as my old e8400.  But no hail mary runs yet.  I ran OCCT for 10 mins to test vdroop at 490x9.5-1.6v but nothing past that. 

[Super J]

got my 3.0 pentium d to 4.506.  help my scores out quite a bit but i also ordered my e6600 today so hopefully that will help out alot as well.  anyone know anything about that chip.  also gonna be getting a P5N32-SLI in the next week.

[Super J]

new chip and board.  board really sucks overclocking

[smitty1258]

well after a little tinkering, I cant get anything over 4.3 stable orthos for 15 mins, just wont happen.

However 3DMark 06 is another story

Read em and weep boys




I might be able to squeeze another 50 points or so outta her, but the cpu is whats holding me back   Still dunno why it shows as a 8500GT in 3dmark though. To much voltage eh? NEVER ENOUGH!!!

[Super J]

smitty what memory are you runing

[DriveRaider]

ok, i was finally able to run 3dMark with 1280x1024. i got one of my Old CRT monitors to do it. here are my scores, but remember i only spent $350 on my box. my next upgrades are going to be:
video card> http://www.newegg.com/Product/Product.aspx?Item=N82E16814150261
CPU> http://www.newegg.com/Product/Product.aspx?Item=N82E16819115017
monitor> http://www.newegg.com/Product/Product.aspx?Item=N82E16824254018

let me know how my scores are for my setup. also, if i drop in a quad later do i need to change any of my FSB overclocked settings or will the chip auto detect it all.

[DriveRaider]

do i get a hall of fame spot with 6331? i see PCgamer has 5504. res is at 1280x1024 as well. i also just OC'ed my CPU by increasing the FSB to 1120 giving me 2.8ghz. When i click PCmark05 details this is what it says:

Internal Clock Maximum: 2.8 GHz     
External Clock: 280.0 MHz     
Socket Designation: Socket 775     
Upgrade: ZIF Socket

Think maybe i got a locked CPU? anytime i try to go above 2.8 i get lockups. its a step D and a Rev M0 i heard i could get 3.0+ easily. could they have locked it? Fuck tigerdirect if they did!