NoBS|Public Lounge => Lounge => Topic started by: werth on October 03, 2007, 05:46:22 PM
Title: help!!!!!!!!!!
Post by: werth on October 03, 2007, 05:46:22 PM
ok heres the scenario..
-vid card has dual dvi output -old monitor was vga--used a converter thing
1)new monitor.. dvi unplugged the old monitor, and the power and when i was pluggin in the new one i accidentally unplugged the power to the comp 2) monitor wont show anything now with either monitor!!!!! tried both, both ports, diff shit i dont get anything 3) im actually using the comp right now via logmein so theres nothing wrong with the comp.. so is this my vid card? I open device manager says its working fine..
How can i check if the vid card is working properly and if this is the fuckin piece of shit thats pissing me off now.
ps. i dont have another pci-e to try :(
Title: Re: help!!!!!!!!!!
Post by: werth on October 03, 2007, 06:11:02 PM
ok.. hold off til after hockey iwll explain..
new monitor: lg 19 wide 3000:1 contrast (dfc) 2ms
Title: Re: help!!!!!!!!!!
Post by: DigitalKiller on October 03, 2007, 08:15:54 PM
wow thats wierd!
Title: Re: help!!!!!!!!!!
Post by: Wowza on October 03, 2007, 09:26:55 PM
Reply is usually simple..
1. What is the refresh rate of your old monitor.. I assume probably a CRT and thus 75hz or more.. 2. What is the refresh rate of your new monitor.. I assume probably a LCD and thus 60hz..
This is at least the issues we had at work when we switched over to LCD's... people though you could just unplug and replug.. You can't. Use your old monitor and change the refresh to 60hz, then plug in your LCD and you should see..
* All of the above are made on assumptions *
Title: Re: help!!!!!!!!!!
Post by: Sounds on October 03, 2007, 10:00:36 PM
my LCD runs 75hz. also he said neither monitor works now. so ya...
if your new monitor has a vga cable, try using that. i had issues getting dvi to work out of the box with my monitors
Title: Re: help!!!!!!!!!!
Post by: werth on October 03, 2007, 10:38:36 PM
their both lcd's and neither worked, and i didnt change any settings.. what makes this hard to troubleshoot is 1) lg fuckin forgot the dvi cable, and 2) i dont have a second pci-e card
good news tho, I changed the vga cable and it works... go figure... how the fuck does a vga cable fry after the power cuts out.. thanks anyway
Title: Re: help!!!!!!!!!!
Post by: werth on October 04, 2007, 01:35:21 PM
ok now that that shit is resolved and i got my new ballin monitor :)
i need help oc'ing my vid card. is this done through the bios like the cpu?
its a bfg nvidia 7900 gt oc 256mb gddr3 I have a zalman vf900-cu to put on if needed
Title: Re: help!!!!!!!!!!
Post by: smitty1258 on October 04, 2007, 01:45:15 PM
rivatuner
goggle it
or go to guru3d .com
Title: Re: help!!!!!!!!!!
Post by: Sounds on October 04, 2007, 02:26:34 PM
ya atitool, powerstrip, rivatuner(sucks imo), nvidia tools, etc. in OS not bios
Title: Re: help!!!!!!!!!!
Post by: werth on October 05, 2007, 09:41:20 AM
k thanks will try.. also gettin rid of the 19 lg and gettin a 21.6 lg
next.. as far as water cooling.. how is the thermaltake aquarius III, and how much would you pay for a used setup? also is this a new or old model?
Title: Re: help!!!!!!!!!!
Post by: smitty1258 on October 05, 2007, 03:10:33 PM
do not buy a prefab WC setup
you want a nice pump, and block, rad dont really matter to much.
Title: Re: help!!!!!!!!!!
Post by: werth on October 12, 2007, 02:42:21 PM
ok i need help oc'ing the vid card.. i have NO clue wtf to do.. i have atitool and rivatuner..
bfg 7900 gt oc with the stock cooler
is it worth putting my zalman vf-900cu on it?
Title: Re: help!!!!!!!!!!
Post by: werth on October 22, 2007, 02:24:30 PM
i know you guys have been agaisnt the 8600..sayin go with the 8800... but is this not worth it considering the price.. how much difference will it actually see.. ?